Bartending course · Garnishing
Perfume a glass with an absinthe mist
Anders Erickson sprays a little absinthe inside the chilled glass for his Corpse Reviver No. 2. The tiny droplets coat the sides, so you catch the anise aroma as you lift the glass for the first sip.
Step by step
Inspect the coating
Look through the glass in side light. Fine droplets should cover the bowl. Check that the stem and outside are dry.

Aim for a coating across the inner surface. Serve promptly
Strain the cocktail into the prepared glass. Leave a second glass uncoated for comparison and smell the difference before the first sip.
Try it yourself
Fill a clean food-safe atomiser with water and practise over the sink. Direct the mist into the bowl and turn the glass slightly. Use a separate clean, labelled atomiser for absinthe after practising.
How it works
The aromatic coating belongs where the drink will touch it. A puddle at the bottom adds a different dose and can change the balance.
Where should the mist be directed?
- Onto the stem
- Into the air above the guest
- Onto the inside of the bowl

